Cdm20814-setup-exe Downloader 2021
Click Here ->>->>->> https://shoxet.com/2txZxN
How to Download and Install CDM20814-Setup-Exe Downloader for Windows
If you are looking for a reliable and easy way to download and install the CDM20814-Setup-Exe Downloader for Windows, you have come to the right place. This article will guide you through the steps to get this software on your computer and use it to convert your USB devices into serial ports.
CDM20814-Setup-Exe Downloader is a certified driver package that provides support for USB instruments, oscilloscopes and logic analyzers. It is compatible with Windows XP, Windows Vista, Windows 7 and Windows 8 operating systems. It can help you connect your USB devices to your computer and communicate with them using serial protocols.
Step 1: Download CDM20814-Setup-Exe Downloader
The first thing you need to do is to download the CDM20814-Setup-Exe Downloader from a trusted source. You can use the link below to access the download page on Softpedia, one of the most popular software websites in the world.
Download CDM20814-Setup-Exe Downloader from Softpedia
Once you are on the download page, click on the \"Download Now\" button and save the file to an accessible location on your computer. The file name is CDM20814_Setup.exe and its size is 1.65 MB.
Step 2: Install CDM20814-Setup-Exe Downloader
After you have downloaded the CDM20814-Setup-Exe Downloader, you need to install it on your computer. To do that, follow these steps:
Locate and double-click on the CDM20814_Setup.exe file that you have saved on your computer.
Allow Windows to run the file if necessary.
Read the End User License Agreement (EULA) and agree to proceed with the installation process.
Follow the on-screen instructions to complete the installation.
Close the wizard and perform a system reboot to allow changes to take effect.
Congratulations! You have successfully installed the CDM20814-Setup-Exe Downloader on your computer. You can now use it to convert your USB devices into serial ports and communicate with them using serial protocols.
Step 3: Use CDM20814-Setup-Exe Downloader
To use the CDM20814-Setup-Exe Downloader, you need to connect your USB device to your computer using a USB cable. The device should be recognized by Windows and assigned a COM port number. You can check this by going to Device Manager and expanding the \"Ports (COM & LPT)\" section.
Once you have identified the COM port number of your device, you can use any serial communication software to send and receive data from it. For example, you can use PuTTY, a free and open-source terminal emulator that supports various serial protocols such as RS232, RS422 and RS485.
To use PuTTY with your device, follow these steps:
Download PuTTY from https://www.putty.org/ and run it on your computer.
Select \"Serial\" as the connection type and enter the COM port number of your device in the \"Serial line\" field.
Adjust the other settings such as baud rate, data bits, stop bits and parity according to your device specifications.
Click on \"Open\" to start the serial communication session with your device.
You can now send and receive data from your device using PuTTY's terminal window.
You have successfully used the CDM20814-Setup-Exe Downloader to convert your USB device into a serial port and communicate with it using PuTTY. You can also use other serial communication 061ffe29dd